A comprehensive guide to setting up your T200 respirator.

Back to Articles & Resources View all Using Your Respirator content

Watch the video below to learn how to set up your T200 respirator for use with the RPB PX5 PAPR, including:

  • How to set up your T200
  • How to set up your PX5
  • How to don and doff your T200 and PX5

Frequently asked questions about the RPB T200

  • How often do I need to replace the hood? This is completely dependent on the frequency of use and the application you’re working in. Applications with dust hazards may last longer than those with overspray, such as painting. Make sure you’re completing daily seal/tear checks of the material to ensure your safety.
  • Can the T200 be cleaned and disinfected? Yes, all components of the T200 can be cleaned, disinfected, and reused. Refer to our guide for a full list of tested cleaning products.
  • There are gaps by my ears when I put this on the T200, how do I fix this? Ensure that your face is positioned as close to the visor as possible. This will help provide a better seal on the sides. The black elastic cord around the chin may also need to be pulled through the clips on the side of the T200 shroud and then tightened using the synch at the back. This will tightened the bib under the chin and on the side of the face. Finally, this is designed to be a loose fitting face piece, so it is expected that air can escape out the sides, however because it is positive pressure external ambient air is unable to enter.

Learn more

For more information on the T200 visit the product page or download the product documentation including product manuals and approval certificates from the resources page.